This is the place to learn about woodworking. This article is chock-full of excellent tips for people just like you. If you wish to go to new heights in woodworking, read the tips that follow.
Safety must be a priority when doing woodworking. Make sure that you always use tools properly and wear the proper safety equipment. Always keep safety guards in place on power tools. This will reduce the chances for severe injury.
Even if you have been doing woodworking for some time you may want to consider taking a class. There are different levels of classes available, so you should be able to find one that teaches you something and is challenging. There is never too much that you can know about woodworking.
Gel stains are the new big thing for staining furniture and other wood projects that need staining. Liquid-based stain often runs on application, and gel stains stay put much better. Furthermore, since a gel stain is thicker it tends to remain constant through the application process, which lets it be more even on the furniture.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.
It is essential for you to have sharpened tools if you plan on working with wood. Dull tools can be dangerous since they are more prone to slippage. If you have no idea how to hone and sharpen your tools, you will need to learn how since there won’t always be someone around to do it for you.
Get a handle on how a wood takes to staining prior to choosing a wood for a project. Wood designated as “paint grade” is lower in quality and not suitable for staining. Also, particleboard and veneer will be a lot more different. Veneer isn’t going to absorb a lot of stain while your particleboard will absorb way too much. Having the right wood will help ensure that your project goes as planned.
Take advantage of several tools instead of trying to do all of your work on just one. A jig, a tablesaw, a bandsaw and a lathe all have their own uses. It is important that you know what each of these tools do and you use them accordingly while getting the job done.
Get your grip ready for use in advance. A spring clamp may be useful sometimes, but only if you can use more than one hand. It’s hard to open those kinds of clamps with one hand. There is a way to make it easier. Before you begin a glue-up, place all the clamps that you need on a random scrap of wood using both free hands. That way, they are almost at full capacity and can be maneuvered with just one hand.
Working with a table saw can be quite dangerous for people that have long hair. If you are one of these people, it would be a good idea for you to tie your hair up while you work. You don’t want any of your hair to get caught in the blades.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Footwear is an important component of your safety equipment. This is necessary since your work area may be full of wood chips, nails and all types of tools. Stepping on a nail can really hurt your feet! You need to have shoes that are study enough to protect you when working in your woodworking shop.
When caulking using silicone caulk, mist the caulk with a small amount of rubbing alcohol. The alcohol acts as a lubricant allowing your to smoothly run your finger through the caulk for a perfect line of caulk every time. Spraying the surrounding area with alcohol also keeps the caulk from adhering to the surrounding surfaces.
As previously stated, the tips above work for any woodworker of any level. There’s definitely something from above that’ll help you with your next big project. It’s time to start that project!