A-A+

Handy DIY Plumbing Tips For The Homeowner

2019-06-16 Home&Family One

Doing your own plumbing can be an important part of your home improvement. You need to do all of your research, so that you don’t wind up losing a ton of money or destroying your home and your stuff. There are some tips listed here to help you begin with it.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Don’t be afraid to call a professional. Don’t take on jobs to save money, if you aren’t sure how to fix them. Calling a professional plumber saves you money, the experience and know-how can fix your problem sooner and with less fuss.

You can unclog a toilet by pouring warm water in the bowl from waist level. Repeat this procedure if necessary as the water returns back to a lower level.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

One of the things that you can do to maximize the security of your home is to seal all of the cracks in your outdoor faucets. Even a tiny crack can intensify as the season progresses and lead to serious problems down the road. Reduce drips and leaks for optimal protection.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.

If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.

Treating your drains every month is a great way to avoid future clogs and other problems, and it’s a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.

In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home.

Governmental regulations sometimes prevent plumbers from actively providing maintenance to copper piping. If you have a calcium buildup in your copper piping, you are going to need to take care of this yourself. You have to get rid of all the water and add vinegar which eats away the calcium buildup out of copper pipes.

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.

1 comment  view:1   blogger:0 view

  1. plumbing tips 4877

    When winterizing your plumbing system be sure to release the water through pressure. Often times people only close the shut off valves. This does not prevent your pipes from freezing. You must make sure the water is pushed out of the pipes completely or the pipes could freeze and burst into the home.

leave me a message

Copyright@Springever inc. © Spring All rights reserved.  

User login ⁄ Register

Share: